1967 Pontiac GTO Teardown
The condition of the floor
The complete floor pan and supporting braces are in bad enough condition to warrant their complete replacement.
The body will be removed from the frame and mounted on a body dolly to maintain alignment while the floor is cut out and a new set of panels are welded in to place. This will also make restoring the frame and suspension easier.
Removing the body from the frame
Preparing to remove the body to restore frame and replace or repair body panels. This body lift that I made worked well so that the process was simple and maintained the shape of the body.
The rotisserie that I made for the camaro project is in the background and will not be used on this project since everything from halfway up the firewall to the shelf at the rear tail panel will be new.